Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hanwha Techwin Wisenet ANO-L6082R
Summary of Contents for Hanwha Techwin Wisenet ANO-L6082R
- Page 1 NETWORK CAMERA User Manual ANO-L6082R/ANO-L7082R ANV-L6082R/ANV-L7082R...
- Page 2 Network Camera User Manual Copyright ©2022 Co., Ltd. All rights reserved. Hanwha Techwin Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
- Page 3 overview IMPORTANT SAFETY INSTRUCTIONS 22. Installing or using the product in water can cause serious damage to the product. 1. Read these instructions. 23. Although a rapid change in temperature could cause frost inside the dome, there will be no problem with the video.
- Page 4 overview Class construction Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. y Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area.
-
Page 5: Table Of Contents
CONTENTS OVERVIEW NETWORK CONNECTION AND Important Safety Instructions Connecting the Camera Directly to Local SETUP Recommended PC Specifications Area Networking Recommended Micro SD/SDHC/SDXC Connecting the Camera Directly to a DHCP Card Specifications Based DSL/Cable Modem NAS recommended specs (ANV-L7082R/ Using Device Manager ANO-L7082R model only) Automatically searching camera What’s Included (ANO-L6082R/L7082R) -
Page 6: Recommended Pc Specifications
overview RECOMMENDED PC SPECIFICATIONS NAS RECOMMENDED SPECS (ANV-L7082R/ANO-L7082R MODEL ONLY) • CPU : Intel(R) Core(TM) i7 3.4 GHz or higher • For this camera, you are recommended to use a NAS with the following manufacturer’s specs. Recommended Product : QNAP, Synology •... -
Page 7: What's Included (Ano-L6082R/L7082R)
WHAT’S INCLUDED (ANO-L6082R/L7082R) WHAT’S INCLUDED (ANV-L6082R/L7082R) Please check if your camera and accessories are all included in the product package. Please check if your camera and accessories are all included in the product package. (As for each sales country, accessories are not the same.) (As for each sales country, accessories are not the same.) Appearance Item Name... -
Page 8: At A Glance (Ano-L6082R/L7082R)
overview AT A GLANCE (ANO-L6082R/L7082R) OPTIONAL ACCESSORIES FOR INSTALLATION Appearance For your easier installation, you can purchase appropriate optional accessories available. Model name Back Box Corner Mount Others SBP-301HMW2 (Hanging Mount) SBP-300WMW/WMW1 (Wall Mount) SBP-137WMW1 (Wall Mount) SBP-300CMW (Ceiling Mount) ANV-L6082R/L7082R SBP-300PMW1 (Pole Mount) SBV-A14B... -
Page 9: At A Glance (Anv-L6082R/L7082R)
AT A GLANCE (ANV-L6082R/L7082R) Components Appearance Item Description Item Description Dome cover Case cover used to protect the lens and the main unit. Illumination Sensor Detects incoming light to control the IR LED. Camera Case Housing part that covers the camera body. Lens Lens for the camera. -
Page 10: Installation & Connection
installation & connection INSTALLATION (ANO-L6082R/L7082R) How to connect the RJ45 waterproof cable to a LAN cable 1. Insert it through the arrow direction. This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. - Page 11 Outdoor installation Hallway view Camera System When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be The camera can be rotated to enlarge the vertical monitoring area to an aspect ratio of 9:16, making it purchased in stores) so that water does not leak from the gap of the cable connected to the outside.
-
Page 12: Installation (Anv-L6082R/L7082R)
installation & connection INSTALLATION (ANV-L6082R/L7082R) 5. Close the dome cover. Tighten the fastening bolts tightly using the Torx L wrench to prevent water leakage. This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. -
Page 13: Inserting/Removing A Micro Sd Card
INSERTING/REMOVING A MICRO SD CARD Adjusting the monitoring direction for the camera (ANV-L6082R/L7082R) Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated. Tilt Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product. When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended. - Page 14 installation & connection Inserting a Micro SD Memory Card (ANV-L6082R/L7082R) Removing a Micro SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory 1. Separate the Dome cover of the camera. card from the slot.
- Page 15 POWERING AND NETWORKING Network Cable Specification Item Contents Remark Connect your PoE device to the camera. Connector RJ45 Ethernet 10/100BASE-T 10/100 Mbps PoE Router Cable Category 5e Max Distance 100 m DC Resistance ≤ 0.125 Ω/m PoE Support IEEE 802.3af If you use a cable other than Category 5e standards, 100m of transmission distance is not guaranteed.
-
Page 16: Connecting The Camera Directly To Local
network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE You can set up the network settings according to your network configurations. MODEM CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN INTERNET DSL/Cable Modem 1. -
Page 17: Using Device Manager
If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. Device manager program can be downloaded from <Technical Support>-<Online Tool> menu at Hanwha Techwin website ex) 192.168.1.2~254, 192.168.0.2~254, (http://www.hanwha-security.com). -
Page 18: Manually Registering Camera
network connection and setup AUTOMATICALLY CONFIGURING IP Configuring Dynamic IP Receive IP address from DHCP 1. Click the camera from the list that you want to automatically • Example of the Dynamic IP environment configure the IP. ANV-L6082R - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server 2. -
Page 19: Port Range Forward (Port Mapping) Setup
PORT RANGE FORWARD (PORT MAPPING) SETUP Setting up Port Range Forward for several network cameras • You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page. If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the •... -
Page 20: Connecting To The Camera From A Shared Local Pc
network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run device manager. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet browser. -
Page 21: Connecting To The Camera
web viewer CONNECTING TO THE CAMERA Connecting via Bonjour 1. Run the client or operating system in support of the Bonjour protocol. Normally, you would 2. Click the camera name for search. 1. Launch the Internet browser. In the Mac operating system, click the camera name searched from the Bonjour tab of Safari. - The login window is displayed. -
Page 22: Password Setting
web viewer PASSWORD SETTING CAMERA WEB VIEWER SETUP When you access the product for the first time, you must register the 1. Click the [Setup ( )] icon. login password. 2. The Settings window appears. 3. You can configure settings for the camera’s basic information, video, network, event, analysis, and system over the network. -
Page 23: Troubleshooting
appendix TROUBLESHOOTING PROBLEM SOLUTION PROBLEM SOLUTION y On the authentication popup window prompted when initially accessing https, click "View y Verify the settings in the following sequence: File is not transferred to the email Authentication Certificate" and select the "Always trust when connecting to the designated even if a motion detection event is A. - Page 24 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.