Furuno VR-7000S Installation Manual page 59

2.7.1 Video signal (DVI-D/RGB) available with IF-7100
The IF-7100 is compatible with separate sync signals shown below.
• Video signal level: Compliant with the VESA standard.
• Horizontal sync signal: Max.91.146 kHz, positive or negative
• Vertical sync signal: Max. 85 Hz
The table below shows receivable resolution for the IF-7100.
VGA (640 480)
SVGA (800 600)
XGA (1024 768)
Resolution for FAR-28 7 series (1360 1024)
Resolution for FAR-2
SXGA (1280 1024)
WSXGA+ (1680 1050)
UXGA (1600 1200)
2
Full HD*
WUXGA*
Resolution for FAR-28 5 series (1066 800)
: To receive WXGA+ video signal, the IF-7100 FPGA program version should be
1
*
"01.03" or later and serial number (SER.NO.) should be "200991" or later.
: Compliant with CEA standard,
2
*
: For the maximum channel number that can be recorded, see "Recordable reso-
3
*
lution and maximum channel number" below.
Recordable resolution and maximum channel number
When the video signal is input through the IF-7100, the resolution and maximum chan-
nel number that can be recorded are shown in the table below.
No. of pcs
1 SSD (512 GB)
2 SSDs (1 TB)
1
* : Recorded to the long term device (SSD), fixed DRU and float-free DRU.
2
* : Recorded to the long term device (SSD) only.
Resolution
8 series, WXGA+*
3
* (1920 1080)
3
(1920 1200)
1
UXGA 2 ch*
1
UXGA 2 ch*
1
(1440 900)
Resolution/Max. channel number
1
+ Full HD 1 ch*
1
+ Full HD 1 ch* + WUXGA 1 ch*
2. WIRING
DVI-D RGB
OK OK
OK OK
OK OK
OK OK
ON NG
OK OK
OK NG
OK OK
OK NG
OK NG
NG OK
2
2-19