Furuno VR-7000S Installation Manual page 10
Voyage data recorder
Hide thumbs
Also See for VR-7000S:
- Operator's manual (77 pages) ,
- Instruction manual (28 pages) ,
- Operator's manual (56 pages)
Table of Contents
Advertisement
1. MOUNTING
Mounting
Install the data collecting unit (DCU) on a bulkhead.
1. Fasten the unit with four M10 bolts or 10 coach bolts (local supply).
2. Two eye bolts are attached at the top of the unit to hoist the unit onboard. Remove
them after the installation.
3. Attach two cosmetic caps (supplied) to eye bolt holes.
1-2
M10 bolt
or
Ø10 coach bolt
(4 pcs)
Eye bolt
Advertisement
Table of Contents
