Table of Contents
Advertisement
Installation
Connecting Gas & Electric
DANGER
GAS LEAK HAZARD
To avoid risk of personal injury or
death; leak testing of the
appliance must be conducted
according to the manufacturer's instructions.
Before placing appliance in operation, always
check for gas leaks with soapy water solution.
• DO NOT USE AN OPEN FLAME TO
CHECK FOR GAS LEAKS
Standoff Spacer Removal
a barrier between back of range and rear
wall. These must be in place for adequate
ventilation. Standoff spacers can only be
removed if range is installed against a
Non-Combustible wall.
Final Installation
1
Make sure rear trim is properly installed.
.
Connect gas and electrical. Before placing appliance in operation,
DANGER
FIRE HAZARD
Backguards come standard with
standoff spacers which provide
24
1
always check for gas leaks. This must be performed by your
dealer, a qualified licensed plumber, or gas service company.
2
Slide range into place. Be sure
wall anit-tip bracket slides into the anit-tip opening
and floor anti-tip hook and bracket are engaged.
Advertisement
Table of Contents
