Belkin F6D3000-HP User Manual page 46

IC Statement
Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause
undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite
systems) this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Because high power radars are allocated as primary users (meaning they have priority)
in 5250-5350 MHz, these radars could cause interference and/or damage to license
exempt LAN devices.
This device has been designed to operate with an antenna having a maximum gain of 2
dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
If you need warranty or technical support during the warranty support period, you
can locate the HP support location nearest you on:
When you contact HP or an authorized HP service provider, please have available
the product model name and model number, the applicable error messages, and
type of operating system.
© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. The
"Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance.
Dual-Band Wireless
A+G Desktop Card
http://www.hp.com/support
P74924