Table of Contents
Advertisement
Installing and Setting Up the Card
2.5
Push the Card firmly into the PCI
slot that you have chosen. Apply
pressure as needed until the
connector is fully seated.
2.6
Now secure the Card with the
screw that you previously placed in
a safe place.
2.7
Turn the antenna until it is vertical
and pointing up.
2.8
Replace the computer's cover.
Now that the Card is installed, you
can reconnect the power cord, and
turn it back on.
2.9
The Found New Hardware Wizard
will appear. (This may take 15-20
seconds to appear). Select "Install
the software automatically" and
click "Next" to install the hardware.
11
11
1
2
3
4
5
6
Advertisement
Table of Contents
