Table of Contents
Advertisement
Troubleshooting
Note: To check the SSID settings or look for an available network,
double-click the "Signal Indicator" icon to bring up the Belkin
Wireless Network Utility then click on the "Available Networks" tab.
Click on the "Profiles" box if you do not see the network you are
trying to connect to and click "Add". Then follow the instructions
in "Setting up Wireless Network Profiles" of this manual. For more
information about setting up a SSID please reference your router
manufacturer's user manual. If issues persist even at close range,
please contact Belkin Technical Support.
Problem:
Installation CD-ROM does not start Setup Utility.
Solution:
If the CD-ROM does not start the Setup Utility automatically, it
could be that the computer is running other applications that are
interfering with the CD-ROM drive.
If the Setup Utility screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the "My
Computer" icon. Next, double-click on the CD-ROM drive that the
Installation CD has been placed in to start the installation. Then
double-click on the folder named "Files". Next, double-click on the
icon named "setup.exe".
Problem:
Card is not working.
Solution:
If the Card is not working, the problem may be that the Card is
not connected or installed properly. Verify that the Card is plugged
firmly into the PCI slot of your computer. Check to see that the
drivers for the Card have been installed. Right-click on the "My
Computer" icon on your desktop. Choose "Properties" and navigate
to the "Device Manager" and see if your Card is listed without any
errors. If an error is indicated, please contact Belkin
Technical Support.
34
34
Advertisement
Table of Contents
