Table of Contents
Advertisement
Using the Belkin Wireless Network Utility
Connecting to a Wireless Network using WPA-Radius Server
or 802.1x:
To enable the security settings for the Card, you must select a network
from the "Available Networks" tab or a profile from the "Profiles" tab
and follow steps 1-3 of "Setting up Wireless Network Profiles" on page
18 before continuing.
Step 1 – Select "WPA-Radius Server"
or "802.1x" from the "Authentication
Mode" drop-down box.
Step 2 – Select the settings to
connect to your router (or access
point) as indicated by your
network administrator.
Step 3 – Click "Complete" to save
the security settings and the new
profile. To begin using your new
profile, highlight the profile name
by clicking on the name one time,
then click "Connect".
31
31
1
2
3
4
5
6
Advertisement
Table of Contents
