Table of Contents
Advertisement
Troubleshooting
If you are using a Belkin Dual-Band Wireless A+G Router in
802.11a mode, "Belkin Super A" is the default name.
If you are using a Belkin Dual-Band Wireless A+G Router in
802.11b/g mode, "Belkin Super G" is the default name.
If you are using a Belkin 802.11g (125HSM) Router, or Belkin
802.11g (54g) router, "Belkin54g" is the default name.
If you are using a Belkin 802.11b Router, the default name should
be "WLAN".
If you are using a Belkin Pre-N Router, the default name should
be "Belkin pre-N" followed by the serial number specific to
that Router.
If you are NOT using a Belkin Router, please consult your router
manufacturer's user manual for the default name.
4.
If your Router's name DOES appear in the list of "Available
Networks", follow the steps below. If it DOES NOT appear, skip
ahead to number 5.
•
Click on the correct network name in "Available Networks" to
connect to the network.
•
If the network has security (encryption) enabled, you will need
to enter the network key. For more information regarding
security, see the page entitled: "Configuring your Belkin
Wireless Card to Use Security" of this User Manual.
•
Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating a
successful connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
5.
The name of your wireless network DOES NOT appear in the list
of "Available Networks".
If the correct network name is not listed, check the SSID settings
to see if they match. The SSID is case-sensitive and the spelling
on each computer must be exactly the same in order for the Card
to connect to the wireless router or access point.
33
33
1
2
3
4
5
6
Advertisement
Table of Contents
