Belkin F6D3000-HP User Manual page 25

Using the Belkin Wireless Network Utility
Setting Up your Belkin Wireless Router (or Access Point) to
Use Security
To start using security, you need to first enable WEP or WPA for your
wireless router (or access point). For the Belkin Wireless Router (or
Access Point) these security features can be configured by using the
web-based interface. See your Wireless Router (or Access Point) User
Manual for directions on how to access the management interface.
Changing the Wireless Security Settings
The Belkin Dual-Band Wireless A+G Router is equipped with the latest
WPA security feature. They also support the legacy WEP security
standard. By default, wireless security is disabled.
To enable security, you will need to determine which standard you
want to use. To access the security settings, click "Security" on the
wireless section using the web-based interface. (Please see your
wireless router or access point manual for directions on how to access
the security settings.)
23 23
1
2
3
4
5
6