Greenlee 555BAT Instruction Manual page 22

Battery-powered bender
Table of Contents

Advertisement

Additional Bending Instructions (cont'd)
Four-Bend Saddle
1. Select the size and type of conduit. Measure the
height of the obstruction, the distance labeled
LENGTH, and the distance labeled STRAIGHT
SECTION. Determine the angle to be used.
2. Find the table that corresponds to the size and type
of conduit selected in Step 1.
3. Under the column labeled ANGLE, find the appro-
priate angle. Find the row labeled Z. In the row at
the top of the page, find the height (H) of the offset.
The number shown at the intersection of the Z row
and the appropriate H column is Z. Subtract Z from
the LENGTH. Place the first bending mark this
distance from the end of the conduit.
4. In the same column, find the row labeled L1. Place
the second bending mark L1 inches from the first
bending mark.
5. In the same column, find the row labeled L2. Add L2
to the STRAIGHT SECTION. Place the third bend-
ing mark this distance from the first bending mark.
6. Make the final bending mark L1 inches from the
third bending mark.
7. Bend the conduit.
LENGTH
L2 + STRAIGHT SECTION
LENGTH – Z
L1
MARK 1
MARK 2
Greenlee Textron / Subsidiary of Textron Inc.
555BAT™ Battery-Powered Bender
STRAIGHT
SECTION
HEIGHT
ANGLE
L1
MARK 3
MARK 4
U-Bends
1. Select the size and type of conduit. Determine the
LENGTH and the HEIGHT.
2. Find the table that corresponds to the size and type
of conduit selected in Step 1.
3. Under the column labeled ANGLE, find 90 .
4. Find the row labeled Y. In the row at the top of the
page, find the height (H) that corresponds to the
LENGTH. The number shown at the intersection of
the Y row and the appropriate H column is the
distance Y. Place the bending mark Y inches from
the end of the conduit.
5. Find the row labeled L1, and go to the right to find
the height (H) that corresponds to the HEIGHT.
6. The number shown at the intersection of the L1 row
and the appropriate H column is L1. Place the
second bending mark L1 inches from the first mark.
7. Bend the conduit.
Y
MARK 1
22
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
LENGTH
HEIGHT
@ ???
HEIGHT
L1
MARK 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents