Update Firmware - Tally Dascom DL3100 User Manual

Tally Dascom DL-210

3.6 Update Firmware

Dascom is not liable if customers are doing a firmware update by themselves. If
power is switched off during the process, the printer may be damaged afterwards.
(1) Preparation
USB cable, 24V power adapter, DL-210 setup tool, firmware file.
(2) Connection
Connect printer and host with USB cable firmly. Check the Device Manager, if connection is
successful, "USB printing support" will display under "universal serial Bus Controllers" directory.
Otherwise, please check the connection between printer and USB interface, please check
whether the Driver installation is successful or not.
(3) Enter Update Mode
① Lift up top cover and turn up print head mechanism
Print head mechanism
40
User Guide V1.3