Connecting To Computer - Tally Dascom DL3100 User Manual

Tally Dascom DL-210

2.6 Connecting to Computer

NOTE!
Be sure to install the driver before connecting the printer to the host computer.
Before installing, disconnect the Power Unit from the printer (as well as turning the power switch
off). Even when the power switch is off, voltage is still present at some points on the circuit board.
Changing components while the power unit is connected can cause damage to the interface board
and the printer.
Optional Interface
(Serial/ Parallel/
Ethernet/
Bluetooth）
Component Name
Power socket
Power switch
USB interface
Optional interface
(Serial/ Parallel/ Ethernet)
Connection cable must comply with the following requirements:
Connection Type
USB
Serial
Parallel
Ethernet
USB interface
Function
Connect power cord to the printer
For switching on/off printer
Connect USB interface cable from host
Connect optional interface cable from host
(interface type is on request)
Specifications
USB 1.1/2.0 compatible
RS232
IEEE 1284.4
10 Base-T/100 Base-TX compatible
21
User Guide V1.3
Power Switch
Power Socket