Table of Contents
Advertisement
SURFACE MOUNT USING SINE KEYS
Mounting the new DX6H with keys requires the use of sine keys instead of
standard keys. They are available in several different sizes that are listed on
our website at www.kurtworkholding.com. The keys are sold in sets of 2 per
package.
English Mounting:
The DX6H can be properly located using the four English sine key holes
indicated by the Y's in figure 10. The DX6H can be bolted down using the
four 1/2" bolt holes indicated in figure 10 by NN. The DX6H vise can also be
mounted using both bolt slots on the sides of the vise.
Metric Mounting:
The DX6H can be properly located using the four Metric sine key holes
indicated by the X's in figure 10.
PROPER CHIP GUARD INSTALLATION AND USAGE
Table of Contents
Introduction .................................................................................................................3
Fig.11
Setup Instructions......................................................................................................4
Operating Instructions .........................................................................................5-7
DX6 Parts List ...............................................................................................................8
DX6 Mechanical Drawing ........................................................................................9
Maintenance Schedule....................................................................................10-12
Troubleshooting Tips ............................................................................................. 13
CAUTION:
Is used when your action or lack of action may cause serious
CAUTION:
injury.
Chip Guard stock shown above is provided to keep chips from
the nut and screw assembly and must be cut and deburred to
meet your application and safety needs.
Example: Part plus 1 inch = Length of Chip Guard.
Note:
Remove Chip Guard
cause injury.
15
stock. If left uncut, the excess material could
OPERATING INSTRUCTIONS
Advertisement
Table of Contents
