Registering Ip Cell Stations - Panasonic KX-NCP0158 Quick Installation Manual

8 Registering IP Cell Stations

8 Registering IP Cell Stations
Registering the IP-CS
Note
When using a traditional CS in the same area, connect it to the PBX first, as Master CS1, and then register
IP-CSs.
1. Connect the PC to the PBX with an Ethernet straight cable or RS-232C cross cable.
2. Click Connect from the program launcher.
3. a.
Select KX-NCP500/1000 from PBX Model.
b.
Select the LAN or RS-232C tab, depending on the type of PC connection with the PBX.
c.
Specify the settings as required.
d.
Enter the system password for installer (default: 1234).
CAUTION
To avoid unauthorized access and possible abuse of the PBX, we strongly recommend:
a.
Keeping the password secret.
b.
Changing your password regularly.
c.
Selecting a complex, random password that cannot be easily guessed.
e.
Click Connect.
4. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen, and
click Select Shelf. Move the mouse pointer over
the V-IPCS4 card. A menu will be shown under the
mouse pointer.
c.
Click Port Property.
5. Click Registration.
A dialog box will appear. Non-registered (available)
IP-CSs are displayed on the left.
42 Quick Installation Guide Document Version 2009-06