Panasonic KX-NCP0158 Quick Installation Manual page 45

Note
When uninstalling IP-CSs that are supplying the clock signal, air synchronization is lost. If there is an IP-CS
that is synchronized with the IP-CS that is being uninstalled, reconstruct the air synchronization tree
beforehand so that the uninstalled IP-CS is not supplying the clock signal to any IP-CSs.
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen, and
click Select Shelf. Move the mouse pointer over
the V-IPCS4 card. A menu will be shown under the
mouse pointer.
c.
Click Port Property.
2. Click De-registration.
A dialog box will appear. Registered IP-CSs are
displayed on the left.
3. a.
Highlight IP-CSs and click the right arrow to select
them for de-registration.
b.
Click Next.
A dialog box will appear.
c.
Click Confirm.
If the de-registration is successful, the dialog box
will show "De-registration succeed".
d.
Click Close.
Once the IP-CS is successfully de-registered, the status of the IP-CS will update to show "None".
Forced De-registering the IP-CS
Follow the steps below to forcibly de-register an IP-CS when normal de-registration was unsuccessful.
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen, and
click Select Shelf. Move the mouse pointer over
the V-IPCS4 card. A menu will be shown under the
mouse pointer.
c.
Click Port Property.
2. Click Forced De-registration.
A dialog box will appear. Registered IP-CSs are
displayed on the left.
Document Version 2009-06
8 Registering IP Cell Stations
Quick Installation Guide 45