Table of Contents
Advertisement
COPY TAPE SETTINGS
1 : EZ-COPY
2 * SPEED MATCHING
3 : COPY MODE
PRESS 1~3 TO SET
MENU = [MENU]
END = [QUIT]
Speed Matching ensures that
both decks are synchronized
for optimal copy quality.
COPY TAPE SETTINGS
1 : EZ-COPY
2 : SPEED MATCHING
3 * COPY MODE
PRESS 1~3 TO SET
MENU = [MENU]
END = [QUIT]
Set the Copy Mode to
Auto, HQ1 or HQ2.
20
DUAL-DECK VCR USER'S GUIDE
Special Note on EZ-Copy
EZ-Copy will automatically change the record speed to ensure
a complete copy of your original tape. EZ-Copy automatically
matches the source tape speed initially. If EZ-Copy deter-
mines there is not enough time left on the tape to copy the
entire original it will automatically change the speed to EP.
For best results, be sure to set Tape Length in the VCR
SETTINGS menu (see page 26) before starting EZ-Copy.
Speed Matching
During a Copy Tape session, Speed Matching automatically
sets the Deck 2 record speed to be the same as the Deck 1
OFF
ON
ON
OFF
playback speed. You will get the best copy quality when this
AUTO
feature is turned on.
Note: When EZ-Copy is on, the Speed Matching setting
is automatically controlled to ensure complete
copy of the original tape.
1
Press
2
Press "1" to select COPY TAPE SETTINGS.
3
Press "2" repeatedly to set SPEED MATCHING to:
On - Use when optimal copy quality is desired. The record
speed will automatically match the play speed in Deck 1.
Off - Use only if you want to record two or more SP tapes
onto one EP tape. If so, you must set the Record Speed
manually with the SP/EP button while Deck 2 is in
Stop or Pause mode (see page 26).
Copy Mode
Your Dual-Deck VCR offers you the choice of three copy
OFF
modes–HQ1 (High Quality 1), HQ2 (High Quality 2), and
AUTO
ON
HQ1
AUTO
AUTO–which use Go-Video's patented AmeriChrome
HQ2
Circuitry for optimal duplicating results.
To set the Copy Mode:
1
Press
2
Press "1" to select COPY TAPE SETTINGS.
3
Press "3" repeatedly to set COPY MODE to:
Auto - Automatically selects the best copy mode based on
HQ1 - Best if the source tape is in SP or for any
HQ2 - Best if source
tape is in LP or
EP without Copy
Guard.
to display the MAIN MENU.
MENU
to display the MAIN MENU.
MENU
the speed of the source tape.
tape with Copy Guard.
I
f you wish to view a TV program
while copying a tape, push TV/VCR on
the remote until TV is selected, then
change channels on your TV.
Advertisement
Table of Contents
