Table of Contents
Advertisement
14
DUAL-DECK VCR USER'S GUIDE
Summary of Automatic Features
For your convenience, the Dual-Deck VCR comes with a
variety of automatic features:
Auto Power On
Power turns on automatically when a tape is inserted into
either deck or when a Timer Recording starts.
Auto Power Off
If you press
while Rewinding, Copying, Timer Record-
POWER
ing, One-Touch Recording or using EZ-Copy, the VCR will
power off automatically when that function is completed.
The power indicator on the front panel display will blink
when Auto Power Off is activated. To deactivate Auto Power
Off, press
again.
POWER
Auto Play
When a tape without a record safety tab is inserted into
either deck, your Dual-Deck VCR will play the tape auto-
matically. To set Auto Play see page 21.
Auto Rewind
Your Dual-Deck VCR will automatically rewind when the end
of the tape is reached while playing or fast forwarding. To set
Auto Rewind, see page 21.
Notes: •During Loop Playback and Loop Record,
the tape will always rewind automatically.
• During Timer Record, the tape will never
Auto Rewind (to prevent accidental erasure
by another Timer Event).
Auto Stop
The VCR will stop automatically if a deck is left in Play Still
or Record Pause for more than 5 minutes. This prevents
excessive wear on the videotape.
Auto Tracking
Digital Auto Tracking is used to adjust tracking automati-
cally and typically executes in under four seconds.
Auto Dimmer
The Dual-Deck VCR front panel display will dim automati-
cally when the power is turned off. To set Auto Dimmer see
page 11.
Remote Eject
Remote Eject allows you to eject tapes with your remote
control by pressing the
see page 24.
key twice. To set Remote Eject
STOP
Advertisement
Table of Contents
