National Datacomm 9210S01 User Manual page 50

Create Host Table via Automatic Discovery
Click the Automatic Discovery icon to find all compatible devices. Select the
desired outdoor bridges (for example, those located in Building A). Click the right
mouse button to open the pop-up menu. Choose Export Host Table to save the Host
Table to a file (for convenience, you can save the Host table on a network disk for
ease of access).
Import Host Table to check device's availability
Import the Host Table from a file (for convenience, you can retrieve the Host table
from a network disk for the ease of access). Once the Host Table is imported, WLAN
Management System will automatically check the availability of outdoor bridges
listed in the Host Table. This is an extremely powerful feature to make up for a
shortcoming of the Auto-Discovery function. Auto-Discovery can only find
compatible devices when they are alive. Failed devices cannot be found via
Auto-Discovery. The devices listed in the Host Table should be available and
provide the service. If they do not exist, WLAN Management System can report
their absence immediately so that the system administrator can take appropriate
action.
New/Edit/Delete a Host Address on Host Table
Click the Add New Address button to open the New/Edit Address dialog box (Figure
43). After the outdoor bridge's IP address has been entered, WLAN Management
System will automatically find the device and list it in the Host Table. You can also
select any outdoor bridge in the table and click the Remove Host Address button to
delete it whenever it is no longer necessary.
42
11-Mbps Wireless Outdoor Bridge