Table of Contents
Advertisement
Basic Rates
Channel
Number
Regulatory
Domain
Important:
In a multiple cell network topology, overlapping and/or adjacent cells using different
channels can operate simultaneously without interference if the difference between
the center frequencies is at least 30 MHz. For example, channels 1, 7, and 13 are
non-overlapping frequency channels.
Bridge Mode
22
This value determines the basic rates used and
reported by the outdoor bridge. The highest rate
specified is the rate that the outdoor bridge will use
when transmitting broadcast/multicast and
management frames. Available options are:
•
1, 2 Mbps
•
All (1, 2, 5.5, and 11) Mbps
You can change the channel number from here.
Wireless outdoor bridges that will be in
communication with each other must be set to use
the same channel in order to be able to establish a
wireless link or links.
Identifies the country where the outdoor bridge is
used. Each country has defined its available channel
numbers and transmission power
Figure 16. Bridge Mode – Point to Point
11-Mbps Wireless Outdoor Bridge
Advertisement
Table of Contents
