Factory Reset; Upgrade Firmware; Figure 29. Warning Before Factory Defaults Are Loaded; Figure 30. Upgradef - National Datacomm 9210S01 User Manual

Factory Reset

Click Factory Reset if you want to return the device to its factory default settings.
A warning dialog box will open (Figure 29).

Figure 29. Warning before factory defaults are loaded

Click Yes to return the outdoor bridge to the factory default settings.

Upgrade Firmware

The outdoor bridge's embedded software is contained in "flash" ROM, and can be
updated over your LAN via the WLAN Management System. To download new
embedded software to the device, click Upgrade Firmware. The Upgrade Firmware
dialog box will open (Figure 30).
Figure 30. Upgrade Firmware dialog box
Browse for the file to be uploaded to the outdoor bridge, or type the path and file
name into the Firmware File field.
32
11-Mbps Wireless Outdoor Bridge