National Datacomm 9210S01 User Manual page 12

Windows 95/98
step 1. Click Start/Run, type winipcfg, and click OK. The IP
step 2. Select the network adapter you use to connect to the Outdoor
step 3. Click Renew to retrieve new information (IP address, subnet
Windows NT 4.0
step 1. Click Start/Programs/Command Prompt. Type ipconfig
step 2. Type ipconfig /renew (with a space after ipconfig) and press
step 3. Type exit and press Enter.
Windows 2000/XP
step 1. Click Start/Programs/Accessories/Command Prompt. Type
step 2. Type ipconfig /renew (with a space after ipconfig) and press
step 3. Type exit and press Enter.
4
Configuration dialog box will open.
Bridge. Click Release.
mask, and default gateway address) from the DHCP server.
Click OK to save the changes and exit the program.
/release (with a space after ipconfig) and press Enter.
Enter to retrieve new information (IP address, subnet mask,
and default gateway address) from the DHCP server.
ipconfig /release (with a space after ipconfig) and press Enter.
Enter to retrieve new information (IP address, subnet mask,
and default gateway address) from the DHCP server.
11-Mbps Wireless Outdoor Bridge