How To Use This Guide - National Datacomm 9210S01 User Manual

How to Use this Guide

This user's guide gives complete instructions for installation and use of the 11-Mbps
Wireless Outdoor Bridge.
Wireless Outdoor Bridge is supplied with factory set default network settings. Use
the WLAN Management System tool to change the default settings before
introducing a new bridge to an already-established wireless network.
The WLAN Management System is a simple-to-use, yet extremely powerful,
SNMP-based utility for online central configuration and network management from
a remote station on the same subnet. A trap management program is also provided to
monitor/diagnose the Outdoor Bridge.
Read through the next section 'Planning the Network', in order to get the best
possible performance from the 11-Mbps wireless network.
Step 1: Plan the wireless network
Step 2: Pre-configure the bridge
before installing it into
an existing Ethernet
network
Step 3: Install the bridge into the
Ethernet network
Step 4: Make online
configuration and
manage the bridge via
the WLAN Management
System utility
11-Mbps Wireless Outdoor Bridge
Planning the Network
See "
Hardware Configuration
See "
Installing the WLAN Management
See "
System
," for details.
Using the WLAN Management System
See "
for details.
," for details.
," for details.
,"
7