Using The Wlan Management System; Auto-Discovery - National Datacomm 9210S01 User Manual

Using the WLAN Management System

Once the outdoor bridge is connected to an Ethernet network, a network
administrator can connect to it from any PC on the same network via the WLAN
Management System utility.
The WLAN Management System utility is a Windows-based SNMP management
tool allowing network administrators to remotely configure and monitor the outdoor
bridge through an Ethernet connection. To launch the WLAN Management System
utility:
step 1.
Click Start > Programs > WLAN > Management System > WLAN
Management System. The main WLAN Management System window
will open. Click Start/Start Hosts View.

Auto-Discovery

This discovery protocol can discover all compatible wireless operating devices
connected to the Ethernet LAN within the same subnet.
step 1. Click the Auto Discovery icon (a pair of binoculars) on the left side of the
Hosts View window. All working compatible devices will automatically
be discovered.
step 2.
Select one of the wireless devices on the list. The utility buttons on the
left toolbar will be enabled.
step 3.
Right-clicking on a particular device will open a pop-up menu offering
the same functions as the toolbar (Figure 11).
16
11-Mbps Wireless Outdoor Bridge