Fuse Replacement; Mounting; Orientation; Rigging - Chauvet Laser Pointer User Manual

Fuse Replacement

1.
2.
3.
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.

Mounting

Orientation

This product may be mounted in any safe position, provided there is adequate room for ventilation.

Rigging

It is important never to obstruct the fan or vents pathway. Mount the product using, a suitable "C" or
"O" type clamp. Adjust the angle of the product by loosening both knobs and tilting the product.
After finding the desired position, retighten both knobs.




Scorpion™ GBC User Manual
With a flat head screwdriver wedge the fuse
holder out of its housing.
Remove the damaged fuse from its holder
and replace with exact same type fuse.
Insert the fuse holder back in its place and
reconnect power.
When selecting installation location, take into
consideration access and routine maintenance.
Safety cables must always be used.
Never mount in places where the product will be
exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
Do not use any tool on the bracket adjustment
knob. Hand-tighten only!
The fuse is
located inside
this
12
Note!
Clamp is sold separately.
Hanging Clamp
August 2011