Table of Contents
Advertisement
4. O
PERATION
Control Panel
Access control panel functions using the four panel buttons located directly underneath the LED
Display.
Button
<MODE>
<UP>
<DOWN>
<ENT>
The Control Panel LED Display shows the menu items you select from the menu map. When a
menu function is selected, the display will show immediately the first available option for the
selected menu function. To select a menu item, press <ENT>.
Use <UP> and <DOWN> to navigate the menu map and menu options. Press <ENT> to access the
menu function currently displayed or to enable a menu option. To return to the previous option or
menu without changing the value, press <MODE>.
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must
set the starting address for this mode. If this is your first time using DMX, then it is recommended
that you refer to the "DMX Primer" section in the "Appendix" of this manual.
When operating in DMX receiving mode, the display will blink at a constant rate in the
absence of DMX signal.
Use the following procedure for setting the product to DMX operation.
Scorpion™ GBC User Manual
Function
Used to access the menu or to return to a
previous menu option
Scrolls through menu options in
ascending order
Scrolls through menu options in
descending order
Used to select and store the current
menu or option within a menu
1.
Press <MODE> repeatedly until a number from 001~512 appears on the LED display.
2.
Use <UP> and <DOWN> to select the DMX starting address.
3.
Press <ENT>.
MOD
E
14
U
DOW
ENT
P
N
August 2011
Advertisement
Table of Contents
