SMC Networks BARRICADE N SMCWBR14SN5V2 User Manual page 77

Status - The status of this entry either Enabled or Disabled.
◆
To setup a virtual server entry:
Click the Add New... button.
1.
Select the service you want to use from the Common Service Port
2.
list. If the Common Service Port list does not have the service that
you want to use, type the number of the service port or service port
range in the Service Port box.
Type the IP Address of the computer in the IP Address box.
3.
Select the protocol used for this application, either TCP, UDP, or All.
4.
Select the Enable check box to enable the virtual server.
5.
Click the Save button.
6.
Figure 63: Add or Modify a Virtual Server Entry
If your computer or server has more than one type of available
N :
OTE
service, please select another service, and enter the same IP Address for
that computer or server.
To modify or delete an existing entry:
Click Modify for the entry you want to modify. If you want to delete the
1.
entry, click Delete.
Modify the information.
2.
Click the Save button.
3.
Click the Enable/Disable All button to enable/disable all entries.
4.
Click the Delete All button to delete all entries.
5.
– 77 –
| Configuring the Router
C 4
HAPTER
(Figure 63)
Forwarding