Advertisement
ST-POE-S16-200W
Specifications (Typical)
1. Standard
2. Protocol
3. Data Transfer Rate
4. Network Cables
5. Number of Ports
6. PoE Power on RF-45
7. AC to DC Power
8. Power Consumption
9. Humidity
10. EMI
11. Safety
12. RAM Buffer
13. Filtering Address Table
14. Packet Filtering/Forwarding Rate
15. MAC Address Learning
16. Transmission Method
17. Dimensions
18. Operating Temperature
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose.
damaged or defective please contact your distributor or Securitytronix in the USA at
1-610-429-1511 for assistance.
v1.0 10/14/10
SPECIFICATIONS
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3af Power over Ethernet
CSMA/CD
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)
10BASE-T: 2-pair UTP CAT 3, 4, 5 up to 328 feet
100BASE-Tx: 2-pair UTP CAT 5, 5e up to 328 feet
16x10/100Mbps auto-MDIX RJ-45 ports with16 PoE enabled ports
Power +: ping 3 and ping 6; Power -: ping 1 and ping 2
Input 110V~240VAC, 50Hz ~ 60Hz. Output 48VDC @ 4.16A
8.0 watts (max with no PD device connected)
192 watts (max with 16 PoE ports connected)
Relative humidity 5% - 95%
FCC Class B, CE Mark Class B
110VAC to 240VAC power supply UL listed
64K bytes per device
1K entries per device
10Mbps Ethernet: 14,880/pps; 10Mbps Ethernet: 148,800/pps
Automatic Update
Store-and-Forward
17"W x 10.4"D x 2.6"H
32°F ~ 104°F
INSTALLATION AND OPERATION
If equipment appears to be
3
Advertisement
