Table of Contents
Advertisement
A.1 Introduction
This section describes accessories and options that you may need to use with your
MintDrive
compliance with CE regulations. All connectors and other components must be compatible
with the shielded cable.
A.1.1 Factory fitted options
The MintDrive
described in a separate manual that will be supplied with your product as necessary:
MN1908 - CAN & Auxiliary I/O Option for Flex+Drive
H
Option B provides CANopen, Baldor CAN and additional input / output capabilities. If this
option is fitted, the MintDrive
MN1909 - CAN Option for FlexDrive
H
Option C provides CANopen capabilities. If this option is fitted, the MintDrive
will include connectors X10 and X11.
MN1910 - DeviceNet Option for FlexDrive
H
Option D provides DeviceNet capabilities. If this option is fitted, the MintDrive
will include connector X15.
MN1911 - PROFIBUS DP Option for FlexDrive
H
Option P provides Profibus capabilities. If this option is fitted, the MintDrive
will include connector X14.
MN1901
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
II
. Shielded (screened) cables provide EMI / RFI shielding and are required for
II
can be supplied with a number of factory fitted options. Each option is
II
front panel will include connectors X10, X11 and X12.
II
II
, Flex+Drive
II
, Flex+Drive
II
, Flex+Drive
www.baldormotion.com
Accessories
A
II
II
and MintDrive
.
II
and MintDrive
.
II
II
and MintDrive
.
II
and MintDrive
Accessories A-1
A
II
front panel
II
front panel
II
.
II
front panel
Advertisement
Table of Contents
