Specification; Interface Introduction; Indicator And Interface; Splitter Spec - Zoom 1091 Series User Manual

2 SPECIFICATION

2.1 INTERFACE INTRODUCTION

2.1.1 INDICATOR AND INTERFACE

Table 2.1
ITEM Name
POWER
DSL
INTERNET
Indicator
WLAN
WPS(Optional)
USB(Optional)
LINE
ETHERNET
POWER
SWITCH
Interface
RST(Optional)
WIRELESS(opt
ional)
WPS(Optional)

2.1.2 SPLITTER SPEC

Table 2.2
State introduction
A steady Green light means the power connection works properly
Green, shows DSL line status.
Green, Flashing means the Modem is transmitting or receiving data
Green, Indicates status of connection to the wireless device
Green, Shows WPS status
Green, Shows USB status
Connected with phone line or "ADSL" port of the splitter.
To be connected to a PC network card by a straight-through network cable, also
can use a crossover cable to connect to Hub, Switch or Router.
Power interface, Connect with power adapter.
To turn on / off the power.
Press the reset button and turn on the power, then keep pressing the reset button for
6 seconds. Then you can reset the modem with the default settings.
Open/Close wireless via pressing the button
Allow PC/Phone connecting to the device via WPS
Interface Introduction
Page 4
DSL Gateway/Router User Manual
Total 22 Pages