Advertisement
61.
Locate Door Track Cover. Line up so Track Cover is flush with ouside edges of Door
Stops. This creates an enclosure so the door can not slide out of the track. Track Cover with
6 - 2 1/2" screws.
Track Overlay
Sill.- Bevel.
Thick
3/4" overhang.
Toll Free 1-888-658-1658
Door Track Cover
flush with top of Door
Stops on both sides
Pre-drill
62.
Locate Top Track Overlay (1 1/2" x 3 1/2" x 87 3/4")
and Track Overlay Sill (2 @ 1/2" x 4 1/4" x 43 7/8" - Bevel).
Position sill on top face of track overlay. Tip of bevel sill will
overhang by 3/4" on the track overlay edge with the pre-drill
Thin
holes. With sill properly positioned, nail sill down with
4 - 1 1/2" Finishing Nails. Complete both sill attachments.
www.outdoorlivingtoday.com
Page 31
IMPORTANT -
Slide door back and forth to confirm door
slides freely prior to attaching Top Track
Overlay. Track Brackets are slotted so door
position can be adjusted horizontally, as well
as vertical position with Roller Assemblies.
sales@outdoorlivingtoday.com
Advertisement
