Advertisement
35.
With Rafter Section correctly aligned, secure rafters to walls using 90° Metal Brackets. Start with
outside rafters and secure 2 Brackets with 4 - 1 1/4" Screws per bracket. Screw into Wall Extension
Framing at the front, and Wall Panel top framing at the rear. Complete both sides.
Front
36.
With outside rafters properly secured, completely secure remaining interior rafters using
8 - 2 1/2" Screws. Screw into rafters from inside of Extension Wall framing at front of shed and inside
Rear Wall framing at rear of shed, behind Horizontal Wall Cleats.
37.
Carefully flip Roof Panels over so plywood sheathing is facing up.
Center Rafter/Facia Nailing Strips (2 @ 3/4" x 3/4" x 51") onto outside of
each panel flush with plywood. Attach with 4 - 1 1/4" Screws evenly spaced.
The Rafter/Facia Nailing Strip provides for a greater nailing surface later when
you attach side facia.
Toll Free 1-888-658-1658
Rafter/Facia Nailing Strip.
www.outdoorlivingtoday.com
Page 20
90° Metal Brackets
sales@outdoorlivingtoday.com
Advertisement
