Advertisement
26.
Position and secure 2nd Wall Extendor Panel as per Steps 24 & 25. Additionally, attach to first
Extendor with 2 - 2 1/2" Screws.
27.
With Extendor Walls attached, position Extendor Wall Cleats (2 @ 1 1/2" x 2 1/2" x 42 3/8")
in the lower section of each Extendor Wall. Attach with 3 - 2 1/2" Screws per cleat.
28.
Align Horizontal Wall Cleats (1 @ 3/4" x 3 1/2" x 70", 1 @ 3/4" x 3 1/2" x 21") flush with top of
Rear Wall framing. To help strengthen the Rear Walls, there is a short and a long wall cleat which
meet off-center from the seam between walls. Attach Cleats with 8 - 1 1/4" Screws.
Toll Free 1-888-658-1658
Pilot Hole
www.outdoorlivingtoday.com
Page 15
first.
sales@outdoorlivingtoday.com
Advertisement
