Advertisement
Top Siding Pc.
20.
Locate an Angled Wall Extendor and Top Siding Piece for Angled Wall Extendor (L/R).
Position top siding on wall extendor and align as shown above. Attach with 3 - 1 1/2" Finishing Nails
to top wall framing. There are left/right top siding pieces. Use rough surface side out.
Place finished wall extendor on side wall panel frame. Complete both sides now.
Note: Bottom siding of wall extendor will overhang and cover siding of side wall.
Sidings will
overlap.
Wall framings
flush.
21.
Align wall framing of Angled Wall Extendor and Side Wall so they are flush at the front. The
siding for both walls should also align evenly from front to back.
22.
With Angled Wall Extendor and Side Wall aligned correctly, secure together from the inside with
4 - 2 1/2" Screws.
Toll Free 1-888-658-1658
Siding
lines up.
www.outdoorlivingtoday.com
Page 13
Top Siding Pc. for Angle Wall
can also be installed after Roof
is attached after Step 46.
sales@outdoorlivingtoday.com
x
Advertisement
