Rear Seat Entertainment Function - Alpine 9ZUA147 Manual

9-inch advanced navi station
Table of Contents

Advertisement

Adjusting Bass Level/Treble Level
Bass Level and Treble Level can be set for each front seat and for each
rear seat by touching [Front] or [Rear].
Setting item:
Bass / Treble
Setting contents:
-14 to +14 (Initial setting: 0)
• When the Sound Setup of the Shortcut Setup is selected to "BASS
ENGINE SQ, " you cannot perform the set up.
• Adjustment cannot be performed when Defeat is set to "On. "
• The Bass adjusted setting value is interlinked with Band2 of Dual HD
EQ, and the Treble adjusted setting value is interlinked with Band8.
Setting the BASS ENGINE SQ
Setting the BASS ENGINE Type
Creating the ideal Bass impact for your musical taste using BASS
ENGINE SQ.
Setting contents:
Standard (Initial setting) / Punch / Rich / Mid Bass / Low Bass
Standard:
Mild low-end boost with mid-range focus for front-
center staging.
Punch:
Mid-bass punched up with mid-range impact.
Rich:
Accented highs and mid-bass giving outstanding
balance for all types of music.
Mid Bass:
Strong high frequency emphasis with mid-bass boost
for more low-end attack.
Low Bass:
Strong, low-bass boost with extended highs for a very
dynamic sound.
Adjusting the BASS ENGINE Level
You can adjust the BASS ENGINE Level.
Setting item:
BASS ENGINE Level
Setting contents:
0 to 6 (Initial setting: 3)
• The BASS ENGINE Level 0 of the BASS ENGINE SQ is common to all
the types.
About setup when the external power amplifier is
connected
In order to optimize the BASS ENGINE SQ mode, we recommend the
following procedure to set up the power amplifier.
Use your favorite music to make the following amplifier adjustment.
1)
Set GAIN of the power amplifier to "MIN."
2)
Set the Crossover Mode Sector switch to "OFF."
• If the switch has no "OFF" position, set as near as possible to full
range.
3)
Set the BASS ENGINE Level to "03."
4)
Play a song of the genre you frequently listen to, and adjust
GAIN of the power amplifier.

Rear Seat Entertainment Function

The Rear Seat Entertainment function independently routes different
sources to the front and the rear of the car. For example, while listening
to the radio or other audio sources in the front, HDMI can be enjoyed at
the rear with optional rear monitors and headphones.
Rear Seat Entertainment System Setup screen
Button for changing to the Sound Setup screen.
Visual source selection area that is displayed on the Rear
1, 2
monitor.*
Touch the source icon displayed on the Rear monitor.
Front: The image and sound of the same visual source as the unit
are output.
Off: Stops output to the Rear monitor.
Illumination Color button*
The color coordination select button of the Rear monitor:
White/Blue/Green/Amber/Red/Purple/Skyblue/Off
(This function is depended on Over Head Monitor)
Plasmacluster air volume adjustment button*
Whenever you touch the button, you can change the air volume.
Off
Low
Mid
High
• While the plasmacluster is operating, the indicator is displayed on
the Audio source screen.
Remote Sensor
You can set whether the sensor on Rear monitor receives remote
control operation, or the unit receives it.
*1 The visual source that can be output to the Rear monitor is "HDMI/
DVD, " "iPod Video, " and "AUX. " When the unit plays back the visual
source, you can only select the same visual source as the unit.
*2 When selecting AUX and iPod video source selection, the "Setting the
Additional AUX BOX" (page 49) is set to "On" and an optional
external AUX distribution box is required.
*3 When the Illumination Color in "Setting the Rear Seat Entertainment
System" (page 48) is set to "Off, " the Illumination Color button is not
displayed.
*4 When the Plasmacluster in "Setting the Rear Seat Entertainment
System" (page 48) is set to "Off, " the Plasmacluster air volume
adjustment button is not displayed.
• If the same visual source is being output to both the unit and the Rear
monitor when an incoming/outgoing call is made, the visual/audio
output to the Rear monitor is interrupted temporarily depending on the
source.
If different visual sources are being output to the unit and the Rear
monitor, visual/audio output to the Rear monitor continues without
interrupting playback.
3
4
Off
19
-EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

X109d

Table of Contents