Battery Charging - Maxcom MM910 Instruction Manual

•
Insert the battery so that, +/- contacts are
directed downwards
•
Make sure that the seal around the place where
the battery is installed is correctly placed.
•
After installing the battery, place the battery
cover. First insert the top of the cover, then
place the bottom and tighten the screws.

Battery charging

Note! Use the battery included in the set. Using other
battery may cause the damage of the phone and the loss
of warranty.
Do not connect the charger when the battery cover is
removed.
To charge the phone:
1. Plug the charger to the wall socket.
2. Move the USB seal located on the top of the right side.
3. Connect the plug of the charger to USB jack. Bars
of battery charging on the display will appear and
disappear while charging the battery.
13