Restoring Factory Settings; Connecting The Phone To The Computer - Maxcom MM910 Instruction Manual

Restoring factory settings

Thanks to this option you may restore the factory settings.
In MENU select:
Settings->Restore the factory settings, and then enter the
password. Finally confirm with the green receiver button.
Warning: Default password is: 0000

13. Connecting the phone to the computer

You may connect the phone to the computer using USB
cable, thanks to which you may copy and transfer the files
between the phone and the computer.
Connecting:
- connect the USB cable to the phone
- connect the other end of the cable to the port in the
computer
- on the phone screen the following message will be
displayed (if keys are not locked): „Mass storage device
and „COM port". Select the mass storage devices
55