2.2 LED Status Indicators
Bluetooth LED (Blue)
GPS LED (Green)
Power LED (Red/Orange)
2.3 Power Button
Press and hold power button for 1 second (if off)
Press and hold power button for 1 second (if on)
2.4 Mini-USB Port
The mini-USB port offers provides two functions:
A.) As a power input to recharge the BT-368i Li-ion battery. It will require 3~4 hours to complete a full charge to
the battery. Connect the included USB charging cable to either an active USB port on a PC, or the included
12VDC car charger or 110VAC wall charger.
B.) As an interface when using the optional USB Data Cable (#11-BT368-001A) to connect the BT-386 as a USG
GPS receiver.
Status
Flash once per three seconds
Flash once per second
Status
Flash once per second
Steady on
Status
Red light steady on
Red light off
Orange light steady on
Action
BT-386i
Page 6 of 15
Description
Not Connected
Connected
Description
Position is Fixed
Position Not Fixed
Description
Battery Low
Battery Good
Battery Charging
Function
Power On
Power Down
Version 1.1