Display Panel - Aquacal Heatwave SuperQuiet TropiCool TC1500 Operation Manual

1.3 Display Panel

The following information outlines the operation for a standard installation.
Control Buttons will operate differently for custom installations; such as
l
when a heat pump is connected to an external controller or multiple heat pump
configuration.
See "Operating Heat Pump (With an External Controller)" on page 20.
l
See "Operating Multiple Connected Heat Pumps" on page 22.
l
Buttons
Buttons
Slowly slide a finger across the buttons from left to right to disable the sleep mode.
Sleep mode will automatically reactivate after three minutes have passed.
Select either the pool or the spa thermostat.
Enter the user menu for heat pump options.
Used to increase temperature set point and navigate through menu options.
Used to decrease temperature set point and navigate through menu options.
Used to select the heat pump's operating mode. Also used to edit or confirm options in a menu.
Indicator Lights
Indicators
Heating
Cooling
When calling for heating or cooling, up to a three-minute delay may occur
before the compressor starts. The compressor must be operating before
the indicator will illuminate.
Description
Description
Red LED indicates the unit is heating the water.
Blue LED indicates the unit is cooling the water.
Display Panel
Page - 4