Advertisement
The OSD buttons control an on-screen graphical user interface, which displays on top of your
input video. This allows for intuitive adjustment of the following display parameters:
Parameter
Increase/decrease monitor brightness
Brightness
Default: Maximum
Increase/decrease monitor contrast
Contrast
Default: Best gray-shade performance
Allows fine adjustments of the panel's pixel dot clock
Clock
Only applicable for VGA input video
Allows fine adjustments of the panel's pixel dot clock phase
Phase
Only applicable for VGA input video
Automatically adjusts the system clock to the input analog VGA video signal, affecting
Auto Adjust
the H-position, V-position, Clock, and Phase menu items
Only applicable for VGA input video
Moves the image horizontally on the display in single-pixel increments
H-position
Default: Centered
Only applicable for VGA input video
Moves the image vertically on the display in single-pixel increments
V-position
Default: Centered
Only applicable for VGA input video
Switches the scaling method between Full Scaling and Maintain Aspect Ratio
Default: Full Scaling
Full Scaling – scales the X- and Y-dimensions of the input video (up or down as
needed) to the display's native resolution.
Fill To Aspect Ratio – Assuming a landscape orientation and an input video with aspect
Aspect Ratio
ratio smaller than 1024 x 768 for the 15-inch or 1280 x 1024 for the 17-inch, scales the
Y-dimension of the input video (up or down as needed) to the display's Y-resolution,
and scales the X-dimension to maintain the input video's aspect ratio (and fills the rest
of the display with equal black bars on the left and right).
The touchscreen may need recalibration when switching between Aspect Ratio
options.
Adjusts sharpness of the displayed images
Sharpness
Default: No sharpness adjustment
Only applicable at non-native input video resolutions
Selects the display's color temperature. The available color temperatures are 9300K,
7500K, 6500K, 5500K, and User Defined. If the User Defined option is selected, the
Color
user can change the color temperature by changing individual R, G, and B gains on a
Temperature
scale from 0 to 100.
Default: User Defined with R, G, and B all set to 100
Adjusts how long a period of OSD button inactivity the touchmonitor will wait before
OSD Timeout
closing the OSD. The adjustable range is between 5 and 60 seconds.
Default: 15 seconds
Available Adjustment
User Manual: 1523L, 1723L
SW601951 Rev B, Page 15 of 26
Advertisement
