Operating Instructions; Using The Control Panel; Menu Map; Configuring The Starting Address - Chauvet Home Safety Product User Manual

4. O
PERATING

Using the Control Panel

Menu Map

Configuring the Starting Address

4. Operating Instructions

I
NSTRUCTIONS
Access control panel functions using the four buttons located directly underneath the LED
display.
B
UTTON
Used to scroll through the current
<MODE/
operating mode, as well as back
ESC>
out of the current menu option
<DOWN> Used to select a decreasing value
Used to select an increasing
<UP>
value
Used to activate a selection and
<ENTER>
store it to memory
Mode Programming
DMX Mode Addr
Slave
SLAU
Operation
Sound-active SoUd
Automatic P-
The Sweeper™ LED fixture
configuration/personality, the highest configurable address is 505. Any address higher than this
will prevent access to all of the channels while in this mode; however, if you desire to use one of
the other DMX configurations (personalities), please consider the total DMX channels when
selecting a DMX address.
If this is your first time using DMX, we recommend reading the "DMX Primer" section in the
"Appendix".
F
UNCTION
Description
d001~d512 Selects the DMX starting address
The Slave fixture follows the actions of
NO
the Master fixture
H-
The Slave fixture mirrors the actions of
YES
the Master fixture
Triggers the built-in program to the beat
rUn
of the music, using the internal
microphone
P-_1~10 Selects one of the built-in programs
Adjusts the speed of the automatic
S 01~S100
program
uses up to eight
8
DMX channels. In this
1/12/2011 11:51 AM
DMX