Table of Contents
Advertisement
Quick Links
Single MiLO
Installation and Operating Manual
WARNING
Do not operate this equipment unless you
have read and understood the contents
of this manual! Failure to follow the
instructions contained in this manual
may result in serious injury or death.
This manual contains important safety
information concerning the maintenance,
use, and operation of this product. If
you're unable to understand the contents
of this manual, please bring it to the
attention of your supervisor. Keep this
manual in a safe location for future
reference.
P/N 07.04.893.00
Model MiLO-14
ADVERTENCIA
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el seguimiento
de las instrucciones contenidas en
este manual puede resultar en un serio
lesión o muerte. Este manual contiene
importante información sobre seguridad
concerniente al mantenimiento, uso y
operación de este producto. Si usted
no puede entender el contenido de
este manual por favor pregunte a su
supervisor. Almacenar este manual en
una localización segura para la referencia
futura.
Oven
™
AVERTISSEMENT
Ne pas utiliser cet équipement sans avoir
lu et compris le contenu de ce manuel ! Le
non-respect des instructions contenues
dans ce manuel peut entraîner de
graves blessures ou la mort. Ce manuel
contient des informations importantes
concernant l'entretien, l'utilisation et le
fonctionnement de ce produit. Si vous ne
comprenez pas le contenu de ce manuel,
veuillez le signaler à votre supérieur.
Conservez ce manuel dans un endroit
sûr pour pouvoir vous y référer plus tard.
© 2018 Ovention, Inc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ovention MiLO MiLO-14
Summary of Contents for Ovention MiLO MiLO-14
- Page 1 Conservez ce manuel dans un endroit manual in a safe location for future supervisor. Almacenar este manual en sûr pour pouvoir vous y référer plus tard. reference. una localización segura para la referencia futura. P/N 07.04.893.00 © 2018 Ovention, Inc.
-
Page 2: Table Of Contents
Call our 24 hour, toll-free Ovention Hotline INTRODUCTION Ovention Single MiLO™ ovens set a new standard in cooking quality, speed, flexibility, and efficiency. A new discovery in air handling not only speeds the cooking process, but “scrubs” and recirculates the air through the oven—eliminating the WARNING need for a hood system in most installations. -
Page 3: Important Safety Information
• Do not attempt to repair or replace a damaged power cord. Cord must be replaced by an Authorized Ovention Do not turn off GFCI switch or unplug unit immediately Service Agent or a person with similar qualifications. -
Page 4: Model Description
All Models Operator controls for the oven consist of a touchscreen, a GFCI switch, and a Control Reset switch. A USB port allows the Ovention Single MiLO™ ovens are designed to provide ® uploading of pre-programmed recipes, installation of software unequaled flexibility in both kitchen and front-of-the-house updates, and the opportunity for service diagnostics. -
Page 5: Model Designation
27.2–29.8 NEMA 6-30P 163 lbs. (74 kg) NOTE: Ovention MiLO ovens are designed to accept 208 VAC NOTE: The specification label is located on the right side of the through 240 VAC. The oven will adjust automatically to unit. See the label for the serial number and verification the input voltage. -
Page 6: Dimensions
SPECIFICATIONS Dimensions Width Depth Height Footprint Footprint Door Open Model Width (D) Depth (E) Depth (F) MiLO-14 23-7/16″ 32-3/16″ 25-3/4″ 18-7/8″ 21-3/16″ 41-3/8″ (595 mm) (817 mm) (654 mm) (479 mm) (537 mm) (1051 mm) Specification Label on right side of unit. Front View Side View Oven Cavity Dimensions Model MiLO-14... -
Page 7: Installation
1. Inspect the shipping container for obvious signs of transit damage. If damaged, inform the freight company immediately. CAUTION! Stop! Do not attempt to use a damaged oven. Contact Ovention for assistance. Cooking 2. Cut and remove the shipping bands from around the oven Rack packaging. -
Page 8: Operation
OPERATION General Touch to access About This Oven screen. Use the following information and procedures to operate an Ovention Single MiLO™ oven. ® WARNING Read all safety messages in the IMPORTANT SAFETY INFORMATION section before operating this equipment. In the event of emergency, unplug unit. -
Page 9: Cooking
OPERATION 6. Touch the desired setpoint temperature on the Use arrows to scroll through touchscreen. multiple Recipes screens. • The IR elements, air blowers, and cooling fans will start up. Allow 20–30 minutes for the oven to reach setpoint temperature. •... -
Page 10: Standby Shutdown
OPERATION Standby Shutdown Programming Categories/Recipes Use the following procedures to edit, create, or delete Use the following procedure to put the oven into standby categories and recipes. These procedures require access shutdown during extended periods of non-use. to password-protected screens and should be performed by 1. - Page 11 OPERATION Editing/Creating Categories 3. Touch the category image to select the icon or photo used for the category. The Select Image screen appears and After touching EDIT CATEGORIES on the Settings screen, the shows two tabs—one for icons and one for photos. Edit Categories screen will appear.
- Page 12 OPERATION Touch here to • Touching the setting value for will toggle the Touch setting edit Recipe setting between OFF, LOW, MED, and HIGH. values to edit. name. • Touching the box in the column will either “check” or “uncheck” the box. - An unchecked box indicates active venting is enabled.
-
Page 13: Editing/Creating Setpoint Temperatures
OPERATION Editing/Creating Setpoint Temperatures 4. Edit/create the desired setpoint temperature. To edit an existing setpoint: Use the following procedure to edit or create the setpoint temperature(s) available at oven startup. This procedure a. Touch the desired setpoint to edit. The setpoint will be requires access to password-protected screens and should be highlighted. -
Page 14: Changing Temperature Unit Of Measure
OPERATION Changing Temperature Unit of Measure Importing from a USB Drive Use the following procedure to change the temperature unit Use the following procedure to import pre-programmed recipes of measure between Fahrenheit and Celsius. This procedure or firmware updates from an external USB drive. This procedure requires access to password-protected screens and should be requires access to password-protected screens and should be performed by authorized personnel only. -
Page 15: Maintenance
This unit has no “user-serviceable” parts. If service is 1. Touch on the touchscreen to shut down and allow oven required on this unit, contact an Authorized Ovention Service to cool. Cooling fans will operate until the oven chamber Agent or contact the Ovention Hotline at 855-298-6836. -
Page 16: Monthly Cleaning
Filter Bracket Cleaning the Air Filters 4. Remove each cooking rack. IMPORTANT NOTE: Rear Use of cleaning chemicals not approved by Ovention when Support cleaning the oven chamber will void the warranty. Slot Drip Tray Cleaning the Drip Tray Form No. OVMILOSM-0718... - Page 17 MAINTENANCE 5. Remove and clean the upper and lower crumb trays in the 6. Reinstall the upper and lower crumb trays into the oven oven chamber. To clean the crumb trays: chamber. To install the crumb trays: a. Open the oven door. a.
-
Page 18: Troubleshooting Guide
Authorized Service Agent or Ovention Hotline for assistance. NOTE: To locate an Authorized Ovention Service Agent, access ® the Ovention website at www.oventionovens.com and select the Service & Support tab, or call the Ovention Hotline at 855-298-OVEN(6836). Form No. OVMILOSM-0718... -
Page 19: Options And Accessories
NOTE: Use Oven Cleaner to clean cooking grease and residue safely from the crumb trays and oven chamber.\ Metal Paddle IMPORTANT NOTE Additional accessories are available for Ovention Ovens. Contact the Ovention Hotline at 855-298-OVEN(6836) for information. Form No. OVMILOSM-0718... -
Page 20: Limited Warranty
Ovention in its sole discretion. Ovention reserves the right to accept or reject any such claim in whole or part. Ovention will not accept the return of any Product...
Need help?
Do you have a question about the MiLO MiLO-14 and is the answer not in the manual?
Questions and answers