Ovention Double MiLO2-16 Installation And Operating Manual
  1. Manuals
  2. Brands
  3. Ovention Manuals
  4. Oven
  5. Double MiLO2-16
  6. Installation and operating manual

Ovention Double MiLO2-16 Installation And Operating Manual

Hide thumbs Also See for Double MiLO2-16:
Table of Contents

Advertisement

Quick Links

See also: Installation and Operating Manual
Double MiLO
Installation and Operating Manual
WARNING
Do not operate this equipment unless you
have read and understood the contents
of this manual! Failure to follow the
instructions contained in this manual
may result in serious injury or death.
This manual contains important safety
information concerning the maintenance,
use, and operation of this product. If
you're unable to understand the contents
of this manual, please bring it to the
attention of your supervisor. Keep this
manual in a safe location for future
reference.
P/N 07.04.836.00
Model MiLO2-16
ADVERTENCIA
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el seguimiento
de las instrucciones contenidas en
este manual puede resultar en un serio
lesión o muerte. Este manual contiene
importante información sobre seguridad
concerniente al mantenimiento, uso y
operación de este producto. Si usted
no puede entender el contenido de
este manual por favor pregunte a su
supervisor. Almacenar este manual en
una localización segura para la referencia
futura.
™
Oven
AVERTISSEMENT
Ne pas utiliser cet équipement sans avoir
lu et compris le contenu de ce manuel ! Le
non-respect des instructions contenues
dans ce manuel peut entraîner de
graves blessures ou la mort. Ce manuel
contient des informations importantes
concernant l'entretien, l'utilisation et le
fonctionnement de ce produit. Si vous ne
comprenez pas le contenu de ce manuel,
veuillez le signaler à votre supérieur.
Conservez ce manuel dans un endroit
sûr pour pouvoir vous y référer plus tard.
© 2018 Ovention, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Double MiLO2-16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ovention Double MiLO2-16

Summary of Contents for Ovention Double MiLO2-16

  • Page 1 Conservez ce manuel dans un endroit manual in a safe location for future supervisor. Almacenar este manual en sûr pour pouvoir vous y référer plus tard. reference. una localización segura para la referencia futura. P/N 07.04.836.00 © 2018 Ovention, Inc.

  • Page 2: Table Of Contents

    Call our 24 hour, toll-free Ovention Hotline INTRODUCTION Ovention Double MiLO™ ovens set a new standard in cooking quality, speed, flexibility, and efficiency. A new discovery in air handling not only speeds the cooking process, but “scrubs” and recirculates the air through the oven—eliminating the WARNING need for a hood system in most installations.

  • Page 3: Important Safety Information

    • Do not attempt to repair or replace a damaged power unnecessary contact with unit. cord. Cord must be replaced by an Authorized Ovention • Pan/tray will be very hot upon removal—use oven mitt, Service Agent or a person with similar qualifications.

  • Page 4: Model Description

    MODEL DESCRIPTION All Models Operator controls for each oven chamber consist of a touchscreen, a GFCI switch, and a Control Reset switch. For Ovention Double MiLO™ ovens are designed to provide ® each touchscreen, a dedicated USB port allows the uploading...

  • Page 5: Model Designation

    44–49 NEMA 6-50P 325 lbs. (147 kg) NOTE: Ovention MiLO ovens are designed to accept 208 VAC NOTE: The specification label is located on the right side of the through 240 VAC. The oven will adjust automatically to unit. See the label for the serial number and verification the input voltage.

  • Page 6: Dimensions

    SPECIFICATIONS Dimensions Width Depth Height Footprint Footprint Door Open Width (D) Depth (E) Depth (F) Model MiLO2-16 29″ 32-5/8″ 34-15/16″ 27-1/2″ 24-1/8″ 41-5/8″ (735 mm) (828 mm) (887 mm) (698 mm) (612 mm) (1058 mm) Specification Label on right side of unit. Front View Side View Oven Cavity Dimensions Model MiLO2-16...

  • Page 7: Installation

    1. Inspect the shipping container for obvious signs of transit damage. If damaged, inform the freight company immediately. CAUTION! Stop! Do not attempt to use a damaged oven. Contact Ovention for assistance. 2. Cut and remove the shipping bands from around the oven packaging.

  • Page 8: Operation

    OPERATION General Use the following information and procedures to operate an Ovention Double MiLO™ oven. ® WARNING Read all safety messages in the IMPORTANT SAFETY INFORMATION section before operating this equipment. In the event of emergency, unplug unit. Touch to access About This Oven screen.

  • Page 9: Cooking

    OPERATION 6. Touch the desired setpoint temperature on the Use arrows to scroll touchscreen. through multiple Recipes screens. • The IR elements, air blowers, and cooling fans will start up. Allow 20–30 minutes for the oven to reach setpoint temperature. Touch desired Recipe to start cooking •...

  • Page 10: Standby Shutdown

    OPERATION 5. Open the oven door. Using a paddle, pan gripper, or other Programming Categories/Recipes utensil, remove the cooked food product. CAUTION! Use the following procedures to edit, create, or delete BURN HAZARD—Always use a paddle, pan gripper, categories and recipes. These procedures require access or other utensil to load and unload food product.
  • Page 11 OPERATION Editing/Creating Categories 4. Touch the category name to edit. After touching EDIT CATEGORIES on the Settings screen, the a. Use the keypad that appears to edit the name. Names Edit Categories screen will appear. This screen will look similar can have up to 20 characters.
  • Page 12 OPERATION • Touching the setting value for will toggle the Touch here to edit recipe setting between OFF, LOW, MED, and HIGH. name. • Touching the box in the column will either “check” or “uncheck” the box. Touch here to edit recipe - An unchecked box indicates active venting is enabled.

  • Page 13: Editing/Creating Setpoint Temperatures

    OPERATION Editing/Creating Setpoint Temperatures 4. Edit/create the desired setpoint temperature. To edit an existing setpoint: Use the following procedure to edit or create the setpoint temperature(s) available at oven startup. This procedure a. Touch the desired setpoint to edit. The setpoint will be requires access to password-protected screens and should be highlighted.

  • Page 14: Changing Temperature Unit Of Measure

    OPERATION Changing Temperature Unit of Measure Importing from a USB Drive Use the following procedure to change the temperature unit Use the following procedure to import pre-programmed recipes of measure between Fahrenheit and Celsius. This procedure or firmware updates from an external USB drive. This procedure requires access to password-protected screens and should be requires access to password-protected screens and should be performed by authorized personnel only.

  • Page 15: Maintenance

    9. Reinstall the cooking racks (See INSTALLATION section for details. This unit has no “user-serviceable” parts. If service is required on this unit, contact an Authorized Ovention Service Weekly Cleaning Agent or contact the Ovention Hotline at 855-298-6836. 1. Touch on each touchscreen to shut down and allow oven to cool.

  • Page 16: Monthly Cleaning

    Small Air Filter Upper Cleaning the Air Filters Drip Tray 4. Remove each cooking rack. IMPORTANT NOTE: Use of cleaning chemicals not approved by Ovention when cleaning the oven chamber will void the warranty. Rear Support Slot Lower Drip Tray Cleaning the Drip Trays Form No.
  • Page 17 MAINTENANCE 5. Remove and clean the upper and lower crumb trays in 6. Reinstall the upper and lower crumb trays into each oven each of the oven chambers. To clean the crumb trays in chamber. To install the crumb trays in each oven chamber: each oven chamber: a.

  • Page 18: Troubleshooting Guide

    Authorized Service Agent or Ovention Hotline for assistance. NOTE: To locate an Authorized Ovention ® Service Agent, access the Ovention website at www.oventionovens.com and select the Service & Support tab, or call the Ovention Hotline at 855-298-OVEN(6836). Form No. OVMILOM-0718...

  • Page 19: Options And Accessories

    NOTE: Use Oven Cleaner to clean cooking grease and residue safely from the crumb trays and oven chamber.\ Pizza Screen Round Pizza Screen IMPORTANT NOTE Additional accessories are available for Ovention Ovens. Contact the Ovention Hotline at 855-298-OVEN(6836) for information. Form No. OVMILOM-0718...

  • Page 20: Limited Warranty

    Ovention in its sole discretion. Ovention reserves the right to accept or reject any such claim in whole or part. Ovention will not accept the return of any Product...

Table of Contents