Replacing The Lamp - Dukane ImagePro 6430 User Manual

Appendices
Warning: To avoid
burns, allow the
projector to cool for
at least 60 minutes
before you replace
the lamp!
English ... 84

Replacing the lamp

Optional lamp
456-6430HD (for 6433/ 6433W/6430HD
456-6430 (for 6430/6430W)
The time to replace the lamp is differed from models.
On 6430, and 6430W, the projectors will detect the
lamp life at 4500 hours in ECO Mode Off (6000 hours in ECO
Mode) On 6433, 6433W, and 6430HD, the projec-
tors will detect the lamp life at 3500 hours in ECO Mode Off
(6000 hours in ECO Mode). When the "POWER" LED indica-
tor flashes red and the message below displays on-screen, the
projector has detected that the lamp is approaching its end
of life. Please see the page 72-73. It will show you a warning
message:
WARNING! LAMP
LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!
WARNING! LAMP
LAMP WARNING
LAMP LIFE EXCEEDED.
When you see this message, change the lamp as soon as
possible. Make sure the projector has been cooled down for at
least 60 minutes before changing the lamp.