Display Modes - Sangean Fusion WFR-30 Manual

Display modes

Your radio has a range of display options when in DAB mode:
1. Press the Info button to cycle through the different options.
a. Text
b. Program Type
c. Multiplex Name/Frequency Displays the name of the DAB multiplex to which the current
d. Signal error/strength Displays the signal error and strength for the station being
e. Bit rate and audio type
f . Date
A signal strength indicator is always shown in the lower area of the display on the right hand side.
If the broadcast being received is in stereo, then the stereo speaker symbol will be shown.
If the currently tuned station has been stored as a preset, then the preset number will also be
shown.
Displays text messages such as the artist or track name, phone
in number, traffic alerts, etc.
Displays the type of station being listened to such as Pop,
Classic, News etc.
station belongs as well as its broadcast frequency.
listened to. A lower error number indicates a better quality
of radio signal. The signal strength graph can be used when
positioning the radio or its antenna. For good reception the graph
should occupy three or more blocks.
Displays the digital bit rate and audio coding information for the
station being listened to.
Displays the current date.
DAB 12:34
Heart
More music variety on
Heart
DAB 12:34
Heart
Pop Music
DAB 12:34
Heart
MXR Yorkshire
Freq: 223.936MHz
DAB 12:34
Heart
Signal error: 5
Strength:
DAB 12:34 DAB
Heart Heart
Bit rate: 128 kbps Today's Date:
Codec: MP2 14/09/2010
Channels: Joint Stereo
GB
12:34
45