Brightness Control; Language Selection - Sangean Fusion WFR-30 Manual

Brightness control

The brightness of the display can be adjusted for when the radio is in standby and for when it is
in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than a
higher brightness setting.
1. Press the Standby button to switch on your radio. Access the menu for the current mode by
pressing the Menu button.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press
the Tuning Control Rotary to enter the system settings menu. Rotate the Tuning Control
Rotary until 'Backlight' is highlighted on the display. Press the Tuning Control Rotary to
confirm the setting.
3. In Backlight menu, there are 3 settings:
Time out: to adjust the length of time before the backlight turns off.
On level: to adjust the the brightness when the radio is in use.
Dim level: to adjust the brightness when the radio is in stanby. Rotate the Tuning Control
Rotary to select your option and press the Tuning Control Rotary to confirm your setting.

Language selection

By default your radio will display all menus and messages in English. You can choose your
preferred language.
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning
Control Rotary until 'System settings' is highlighted on the display. Press the Tuning Control
Rotary to enter the settings menu.
2. Rotate the Tuning Control Rotary until 'Language' is highlighted on the display. Press the
Tuning Control Rotary to enter the menu.
3. Rotate the Tuning Control Rotary until your preferred language is highlighted and press the
Tuning Control Rotary to confirm the setting.
Main menu
FM
Aux in
Sleep
Alarms
System settings >
System settings
Equaliser >
Network
>
Time/Date >
Backlight >
Inactive Standby
Backlight
Timeout >
On level >
Dim level >
System settings
>
Network
Time/Date >
Backlight
>
Inactive Standby
Language
>
Language
English
*
French
German
Italian
Danish
GB
69