Table of Contents
Advertisement
Adjusting the shutter speed (continued)
Synchro scan
Adjust the shutter speed to match the frequency of
the television or computer monitor to minimize the
horizontal noise that appears when shooting such
subjects.
•
If SYNC is displayed in grey, it cannot be used
with the current recording format. This function
will only operate for preset values for each
recording format.
Valid setting values will appear to the right of the
adjustment value.
10 80/50i, 720/50P:
1/50.0 to 1/250.0 sec
10 80/25P, 720/25P:
1/25.0 to 1/250.0 sec
1
Set the AUTO/MANUAL switch to MANUAL
to select manual mode. (Page 40)
2
Touch the LCD monitor and display the
Function Navi.
3
Touch
to display the operation menu.
4
Touch SYNC.
•
The shutter speed appears at the left of the
screen.
5
Touch
or
to adjust the shutter speed for
synchro scan.
6
Touch SYNC to close the operation menu.
7
Touch
to close the Function Navi.
•
To activate a synchro scan setting, touch
SHTR and switch to SYNCRO SCAN.
(Page 51)
•
You can change the progressive mode in
the setup menu with REC FORMAT in the
RECORD SETUP screen. (Page 102)
52
AG-HMC41E(VQT2H31(E))̲E.indb 52
AG-HMC41E(VQT2H31(E))̲E.indb 52
2009/07/11 18:41:06
2009/07/11 18:41:06
Advertisement
Table of Contents
