Panasonic AVCCAM AG-HMC41 Operating Instructions Manual page 107

Memory card camera-recorder
Table of Contents

Advertisement

SW&DISP SETUP screen (continued)
Display
Item
SMOOTH
CAMERA
ZOOM STOP
PHOTO
CAM GAIN
CAMERA
LIMIT
PHOTO
FACE
CAMERA
FRAMING
PHOTO
ZEBRA
CAMERA
DETECT
PHOTO
MARKER
CAMERA
PHOTO
GUIDE LINES
PHOTO
HISTOGRAM
PHOTO
SAFETY ZONE
CAMERA
REC COUNTER CAMERA
: Can also be configured in Quick Menu. (Page 96)
AG-HMC41E(VQT2H31(E))̲E.indb   107
AG-HMC41E(VQT2H31(E))̲E.indb   107
Q.MENU
mode
Selects the method in which zoom operations are stopped.
ON:
Smooth stop.
OFF:
Precise stop.
Sets the maximum value for camera gain.
CAMERA mode
24 dB:
12 dB:
PHOTO mode
18 dB:
12 dB:
Sets the detection frame displays when
OFF:
PRIMARY:
ALL:
Selects the brightness level of the left-leaning zebra patterns on the
screen.
105%, 100%, 95%, 90%, 85%, 80%, 75%, 70%, 65%, 60%, 55%, 50%
Select ON to display the marker.
ON OFF
To display the marker, press the ZEBRA button.
Displays guide lines for confirming level shooting.
OFF,
,
Guide lines are not recorded on images.
Guide lines do not appear when the face detection function is set to
ON.
Displays a graph with the horizontal axis representing brightness, and
the vertical axis representing number of pixels.
You can determine the exposure distribution of an entire image by
viewing the distribution in the graph.
ON OFF
Display example
Adjust the brightness by adjusting the aperture.
Sets SAFETY ZONE.
OFF, 90%, 4:3
Selects counter operation during recording.
TOTAL: The count continues to increase until the RESET button is
pressed to reset it.
CLIP:
Resets the counter at start of recording and counts the time of
each recording session.
In PB mode, operation is always in CLIP mode.
Description of settings
Camera gain can be set to up to 24 dB.
Camera gain can be set to up to 12 dB.
Camera gain can be set to up to 18 dB.
Camera gain can be set to up to 12 dB.
A
is selected in auto mode.
O N
Not displayed.
Displays only the primary frame.
Displays all face detection frames.
,
Standard
Dark
Light
indicates the factory setting.
107
2009/07/11   18:42:31
2009/07/11   18:42:31

Advertisement

Table of Contents
loading

Table of Contents