Table of Contents
Advertisement
Setup menu list (continued)
RECORD SETUP screen
Display
Item
mode
REC FORMAT
CAMERA
PREREC
CAMERA
MODE
TIME STAMP
CAMERA
INTERVAL REC CAMERA
TCG
CAMERA
TC PRESET
CAMERA
UB PRESET
CAMERA
WIND CUT
CAMERA
MIC ALC
CAMERA
: Can also be configured in Quick Menu. (Page 96)
102
AG-HMC41E(VQT2H31(E))̲E.indb 102
AG-HMC41E(VQT2H31(E))̲E.indb 102
Q.MENU
Selects the recording format.
PH 1080/50i
PH 1080/25P
PH 720/50P
PH 720/25P
HA 1080/50i
HG 1080/50i
HE 1080/50i
•
You cannot change the format during interval recording.
Sets PRE RECORDING to ON or OFF. (Page 46)
ON OFF
•
TCG is set to FREE RUN.
•
Cannot be set during INTERVAL REC.
Specifies whether date and time information is superimposed over
recorded images.
ON:
Superimposes date and time information on the image.
OFF:
Does not superimpose date and time information on the
image.
Enables frame-by-frame recording at specified intervals to create short
videos of scenes with slow movement over long periods of time. Single
frames are recorded at the specified interval, with 24 frames equaling 1
second of video.
OFF, 1 SECOND, 10 SECONDS, 30 SECONDS, 1 MINUTE,
2 MINUTES
•
When INTERVAL REC is enabled, the following setting items
automatically change as follows.
REC FORMAT: PH 1080/25P
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation
mode.
A slight time error may occur when switching to PB mode if the frame
rate is set to 25P.
REC RUN:
The time code is advanced only when recording.
Sets the initial time code.
YES
NO
•
Set the frame value to 0 or a multiple of 4 when you set recording
frame rate of recording format to 25P. If any other value is set, the
recorded time code will mis-match.
Sets the user information.
YES
NO
Reduces noise caused by strong wind blowing against the built-in mic.
ON OFF
•
When an external mic or an XLR Microphone Adapter is connected,
this setting is fixed at OFF.
Sets mic level auto control to ON or OFF (CH1 and CH2
simultaneously).
ON OFF
•
Set to ON to reduce distortion at high input levels. To adjust the
recording level of audio signals (not related to this setting), adjust the
mic settings in the Function Navi.
Description of settings
indicates the factory setting.
2009/07/11 18:42:27
2009/07/11 18:42:27
Advertisement
Table of Contents
