Table of Contents
Advertisement
Starting and Shutting down the Projector
1.
Connect the power cord to the projec-
tor. Connect the other end to a wall
outlet. (A)
Turn on the power switch. (B)
The Power LED and Lamp-ready LED
turn on.
2.
Remove the lens cover.
3.
Turn on the connected devices.
4.
Ensure the Lamp-ready LED is on a
steady (not flashing) orange and then
press the Power button to turn on the
projector.
The projector splash screen displays
and connected devices are detected.
If the connected device is a PC, press
the appropriate Fn hot keys on the
computer keyboard to switch the dis-
play output to the projector. (Check the
PC user manual to determine the ap-
propriate Fn hot keys to change display
output.)
5.
If more than one input device is con-
nected, press the Source button
repeatedly to switch among devices.
6.
To turn off the projector, press the
Power button. The projector prepares
for shutdown and a "Wait a moment
please..." message appears.
7.
When the "Power Off?/Press Power
again" message appears, press the
Power button. The projector turns off.
Attention : Power off the projector normally and unplug the power cord before moving the projector
– 13 –
S
e
t
u
p
a
n
d
O
p
e
r
a
t
i
o
S
e
t
u
p
a
n
d
O
p
e
r
a
t
i
o
S
e
t
u
p
a
n
d
O
p
e
r
a
t
i
o
n
n
n
Advertisement
Table of Contents
